Tag Archives: C=64

Akai S612 sampler

I opened my newly acquired Akai S612..to check for spiders and animal residue from its previous owner – i was intrigued by the “cassette interface”. Mine was screwed behind a closed metal door.

I realized right away it is the same cassette port as the Commodore 64.

And yes, you can save, verify and load your samples using an old (non)trusty tape Datassette!

I sampled a sound, got some tape to record, went fast forward 004 counts on the tape counter, pressed rec and play and then pressed save on the Akai panel. Red light, it’s recording.

Counter reading 044, the Datassette automatically stopped. I rewound the tape, switched off the Akai (remember with these old machines it is better to switch them off before plugging or unplugging devices from serial ports..), on again and Load. Pressed play on tape, and yes. It’s working. Easy.

No need to buy the MD280 rack to load discs on the S612.. you just need a Commodore Datassette (clean its heads and fix azimuth before doing anything)!

Advertisements

RS7000 controlling SammichSID

I have just made a very rough paper overlay for my RS7000 to use when I am controlling the SammichSID.

There are just not as many knobs as needed (the SID has a pretty deep programming option) but still some tweaking can be done.

So yes, the RS7000 is a great controller for the SammichSID too..

Word template is here: Overlay