Tag Archives: shot

Ace Tone FR8L recapping and external psu, trigger mods

Assorted pics of the actual boards.. might be useful to someone.

That good old recappin’ blues:

Since one of the boards was GLUED to its standoff, i had to solder some caps on top of the older ones.. now one of the caps had leads so short i thought it might be useful to remind myself where does each lead went (see pic w scribble).

And the odd freaky transistors that didnt have its legs cut off (and indeed they were perilously almost touching)

The FR8L can produce 13 drum sounds-and very crispy too, thats why i decided to modify it..

Circuitbenders.co.uk’s trigger module: wires aplenty, but this will allow me to trigger each drum sound from a midi to trigger highly liquid board, that has been assembled back in the day to control my fr3-a build/mod and brilliantly carried out by circuitbenders.co.uk (you can see it HERE and HERE TOO).

The trigger board for the fr8l can be ordered HERE but remember, stock is limited.

Please note a male/female hex spacer (m3 22mm) is needed to screw the trigger board to the existing hex nut.

I decided to put the trigger input jacks in an external box-lots of fun soldering all the tiny jacks!

External PSU mod:

From an idea by circuitbenders.co.uk

READ ABOUT IT HERE

Due to the nature of the machine it is best to reduce background noise as low as possible-and an external power supply may be a better power source than the provided transformer since the filtering in the power supply section is basically nil.

I had to make a quick mod here so if you may, bear with the crudeness of these connections-i was also low on cables so pardon the lacking colour scheme..

Remove the transformer (WARNING: Dangerous voltages around this area)

First of all take a nice picture or two of where the transformer cables were originally.

The plastic thing where the red orange and black wires go is a diode bridge-check the schematic from the FR8L service manual, it has to be removed along with the transformer. We’ll reuse thosw wires so just cut them and leave them hanging for now.

Then when everything has been unscrewed and cables cut, make a bridge connection between the two pins of the on off switch at the tagboard end (pink cable).

Red and orange cables soldered to the positive side, grey cable connecting all black leftover cables to the negative side.

To attenuate noise from using a switching psu i put a choke in series with the positive pole, and a 2200uF 50v capacitor in parallel between + and – like this:

Remember the resistor between + at the psu and the orange cables (you can barely see it in the picture because i used some spare shrink tubing to prevent shorts).

🙂

Advertisements

Roland TR-505 stuff

Points for individual outs (audio signals-add ground from ground point)


Ground

Points for bit-crushing effects: just solder to leads and strike them against the other at pleasure.. i dont like bending stuff, but this is the way it came when i bought it second hand..

I bought a ROM expansion that adda DMX, LINN DRUM and LN1 sound samples.

Desolder IC11


Solder the ic socket


Solder the switch to the pcb



All done! 

You can buy the expansion here:

http://harryaxten.altervista.org/tr505expansion.html

Hohner Cembalet repair

My beloved Hohner Cembalet I has gone silent, all of a sudden.

Here we go with a few pics i took for reference of the main board.

They may help someone else whos trying to fix his Cembalet.. I hope.

Schem and user manual (in kraut):

Hohner Cembalet User Manual with schematic

Update: the Cembalet healed itself and now it works great. I did not have to do anything to it, it just works again, magic, bang.

A friend who’s an electronic repairer said that the most important part to watch out for is the inductor (Spule in german), as it’s custom wound to specs for this instrument.

Jh-1 Dunlop Jimi Hendrix Fuzzface

   Jim Dunlop holds the name FUZZFACE licence. Before it was spelled, FUZZ (space) FACE.

   Silicon BC108 transistors, vintage style build.

UPDATE BEWARE

Much to my surprise, and horror, the other day i decided to have a better look at the board. Well.. AT THE BACK OF THE BOARD, HIDING, it’s all SURFACE MOUNT TRIMMERS. EEEEEEEEEK!!!! This is the fakest pedal ever!

I decided to sell it right away. Although:

How does it sounds? Not bad in my opinion.. And the presentation is quite lush.

The Hendrix family on the other hand.. Geez they never got it with their son being a genius. And now that they can remix his oeuvre in the most appalling way, they went for it. 

I mean.. Has any of you listened to the reissued experience lps? 

Awful out of focus fx added, messy sound image (changes at every other track on the Are You Experienced lp), poor original sources research, no whatsoever idea of whats goin on: they managed to DESTROY even a song as straight forward as Fire! 

Idiotic panning solos? Yeah! 

Awful. 

And before you can say ‘man’, they put out the jimi hendrix fragrances. As if the world needed them badly.

So all in all this is possibly the only instance of the hendrix genius almost given a proper name.