Tag Archives: video

Novation SL Zero mkII Editor – uploading – saving template

Since all the download links seem to be down and this product is not supported anymore by the folks at Novation’s, i thought i’d share with you a link where you will still be able to download the (beta version, please note all the apt disclaimers that apply to betas) SL Zero MkII Editor program, that will allow you to program a template for the midi controller (this is not the Automap program, mind you).

Click here to download the Editor software

…hoping Novation will not take down this link too…

And a quick video on how to upload your template from your pc to Novation’s controller-no fancy stuff.. no screen capture sorry-phone shot. Rough and ready. It’s more of a reminder for me on how to do it lol.. personal reference.

Here:

Advertisements

Roland CR8000 buttons repair made easy

Roland Compurhythm drum machine CR8000 with faulty or worn buttons.

Sounds a lot like the TR808, but a design fault makes these buttons useless after a while.

You will have to pull the plastic covers first, to reveal the spring and rubber dome under which we will drop a bit of conductive paint..

To pull the plastic part you need to push the sides using a screwdriver or two like on this video:

Youtuber The Imp Of The Perverse has made a few vids of his restoration-he used my method too, check them

Hohner Basset

When i bought it it looked like this


I opened it up to clean it and realised this wasnt its original colour.


It really was taupe gray before, but the years had the plastic chassis yellowing

I decided to restore it to its original colour (or as close as i could…)

After 5 months of great fun, I had to open it up because the output went silent.

Gutshots of the Hohner Basset!

Lets start with the DIN jack that connects it to the bass amp..


Keyboard:

Circuit board and caps jungle:

Inside the white enclosure there’s a lamp and a ldr.. this assembly is the actual “percussion” section.

You press a note on the keyboard, the light goes off slowly (sustain) according to the knob position, when not in auto mode.

Video below..

Pcb: 3.1967!!

Ahem this means the caps have been doing their job for 50 long years! Only one of the capacitors has failed, please note- the blue valvo 100uF cap now measures 1uF!

Output DIN and 3 pronged jack, fuse

Video showing the lamp going off when a note is keyed.